ICP Electronics JUKI-6752, Manual

Page: 14 / 21

23
4.2 Standard CMOS Setup
The Standard CMOS Setup is used for basic hardware system
configuration. The main function is for Date/Time setting and
Floppy/Hard Disk Drive setting. Please refer the following screen for this
setup.
For IDE hard disk drive setup, please check the following possible
setup procedure,
1. Use the Auto setting for detection during boot up.
2. Use the IDE HDD AUTO DETECTION in the main menu to
automatically enter the drive specifications.
3. Manually enter the specifications by yourself from
the ”User“ option.
LCD&CRT: This field may appear as an alternative to the video
Field. Select your video display device.
LCD: Liquid Crystal Display
24
CRT: Auxiliary monitor. When you want to use CRT only, please
select this option. The CRT will have good screen.
Both: Display on both device. When you want to use both display,
please select this option.
Panel: This field have eight option that have
1024x768 DSTN,
640X480 MONO,
640X480 DSTN ,
800X600 DSTN ,
640X480 TFT(12bits),
640X480 TFT(18bits),
1024X768 TFT,
800X600 TFT.
Please refer to page 13 .
Halt On (All Errors) : You could choose All Errors , No Errors
All, but Keyboard . All, but Diskette , and All, but Disk/Key
As for some embedded system which don’t need keyboard and
monitor in application, then you could choose No Errors.