ICP Electronics JUKI-6752, Manual

Page: 1 / 21

I
JUKI-6752 Ver 1.0
Low Power Pentium® MMX 266
with CRT/LCD,Ethernet
Single Board Computer
Copyright Notice
©Copyright 2000 by ICP Electronics Inc. All Rights Reserved. Manual first edition
JUL..01, 2000.
The information in this document is subject to change without prior notice in order to
improve reliability, design and function and does not represent a commitment on the
part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of the use or inability to use the product or
documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are
reserved. No part of this manual may be reproduced by any mechanical, electronic,
or other means in any form without prior written permission of the manufacturer.
Trademarks
JUKI-6752 is a registered trademark of ICP Electronics Inc. IBM PC is a registered
trademark of International Business Machines Corporation. Intel is a registered
trademark of Intel Corporation. Other product names mentioned herein are used for
identification purposes only and may be trademarks and/or registered trademarks of
their respective companies.
www.iei.com.tw
II
Contents
Introduction .................................................................... 1
1.1 Specifications : .................................................................................... 2
1.2 What You Have................................................................................... 3
Installation ..................................................................... 4
2.1 JUKI-6752 Layout.............................................................................. 4
2.2 Unpacking ........................................................................................... 6
2.3 Compact Flash Setting (JP1) ............................................................... 7
2.4 Clear CMOS Setup (JP2) .................................................................... 7
2.5 LCD Voltage and Clock setting (JP4)................................................ 7
2.6 COM2 RS-232, RS-422 or RS-485 Setting (JP5) ............................... 8
2.7 COM2 PIN8 Setting (JP6)................................................................... 8
Connection .................................................................... 9
3.1 IDE Disk Drive Connector(CN1)........................................................ 9
3.2 CompactFlash Connector -- TYPE II(CN2)...................................... 10
3.3 PC/104 Connection Bus(CN3,CN4) ................................................. 11
3.4 USB Port Connector(CN5)................................................................ 12
3.5 VGA Connector(CN6) ...................................................................... 13
3.6 LCD Interface Connector(CN7)........................................................ 13
3.7 LAN RJ45 Connector (CN9)............................................................. 15