ICP DAS USA tSH-700 Series, Firmware Update

Page: 4 / 21

tSH-700 Series Firmware Update via Ethernet (Ver. 1.2/Jun. 2017) Page: 3
2. Firmware Update Procedure
The firmware update can fail when the computer has multiple network interfaces (e.g., LAN and Wi-Fi).
Therefore, enable only one network interface for updating the firmware, and temporarily turn off other
network interfaces, firewalls, and anti-virus software first.
Two methods can be used to update the firmware:
“Local Firmware Update” (traditional) and
“Remote Firmware Update” (TeamViewer) . The Local Firmware Update method requires the user to
manually adjust the position of the Init/Run Switch and reboot the module in order to initialize the
of firmware update. Refer to Section 2.1 “Local Firmware Update” for more details. The Remote
Firmware Update method allows the user to initialize the module via a web interface without
needing to adjust the hardware switch. Initialization via the web interface is useful when the module
is installed at a remote site and can be accessed via the TeamViewer application installed on a
remote PC. Refer to Section 2.2 “Remote Firmware Update” for more details.
2.1 Local Firmware Update
Step 1: In the eSearch Utility, click the “Search Servers” button to search for any tSH-700
modules connected to the network . (The network settings of the tSH-700 module are described
in
Step 3 of Chapter 1 above)
Step 2: Right click the name of the tSH-700 module to be updated.
Step 3: Select the “Firmware Update” item from the popup menu and the “Open” dialog box
will be displayed.
1
2
3