tSH-700 Series Firmware Update via Ethernet (Ver. 1.2/Jun. 2017)
Page: 13
3.
Troubleshooting
3.1
Firmware update in BOOTP mode
If the module is not functioning correctly (e.g., if there is no response to the search request, or if
the system LED is continuously either on or off), download a new image of the
firmware from the ICPDAS web site and then update the firmware for the module using the
following procedure.
Step 1: In the eSearch Utility, select the
“BOOTP”
item from the
“Server”
menu. A check mark
should be displayed next to the item after it has
been selected.
Step 2: Set the
“Init Switch”
to the
“Init”
position.
Step 3:
Power-on reset
the tSH-700 module and then click
the
“Search Servers”
button to search for the tSH-700 at the
same time.
Note, the module sends BOOTP messages about
5 seconds when booting in Init Mode.
If this step is not
successful, reboot the module and execute the search
again.
