ICP DAS USA tM Series, User Manual

Page: 51 / 144

2.7 #AAAcDD
Description:
Sets a single digital output channel of the lower eight
channels.
Syntax:
#AAAcDD[CHKSUM](CR)
# Delimiter character
AA Address of the module to be set (00 to FF)
A Command to set a single digital output channel of the
lower eight channels
c Specifies the digital output channel to be set (0 to 7).
DD 00: set the digital output channel to off.
01: set the digital output channel to on.
Response:
Valid command:
>[CHKSUM](CR)
Invalid command:
?[CHKSUM](CR)
Ignored command:
> Delimiter character for a valid command
? Delimiter character for an invalid command
! Delimiter character for an ignored command. A host
watchdog timeout has occurred, the digital output
ports are set to safe value, and the digital output
value that was sent is ignored.
There will be no response if the command syntax is incorrect,
there is a communication error, or there is no module with the
specified address.
tM Series DIO User Manual, Rev: A1.3 7PH-013-A13 51
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru