ICP DAS USA tM Series, User Manual

Page: 39 / 144

2.1 %AANNTTCCFF
Description:
Sets the configuration of a module.
Syntax
:
%AANNTTCCFF[CHKSUM](CR)
% Delimiter character
AA Address of the module to be configured in
hexadecimal format (00 to FF)
NN New address of the module in hexadecimal format (00
to FF)
TT Type code, should be 40 for DIO module.
CC New Baud Rate code, see Section 1.9 for details. The
INIT* pin must be connected to ground in order to
change Baud Rates. For the module with frame
ground, this is achieved by moving the rear slide
switch to the INIT position. See Section A.1 for
details.
FF Used to set the counter update direction and checksum
(Section 1.9). The INIT* pin must be connected to
ground in order to change the checksum setting. For
the module with frame ground, this is achieved by
moving the rear slide switch to the INIT position. See
Section A.1 for details.
tM Series DIO User Manual, Rev: A1.3 7PH-013-A13 39
ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru