According to the above calculation, the three Bit Time registers are as following:
Bit Timing 1 register value is
0x30.
Bit Timing 2 register value is
0x04.
Bit Timing 3 register value is
0x7E.
Then, the users can fill those parameter values as below:
Note:
1. After setting down, users must click “Calculate” button and calculate CAN Baud rate,
otherwise CAN Converter utility could not save the parameter.
2. The function only supports on firmware version 3.00 or more in I-7530 series and I-7565.
If the users do not know how to fill these parameter values, please feel free to contact us.
I-7530, I-7530-FT, I-7530A, I-7565, tM-7530, tM-7530A, tM-7565 User Manual Version 1.5
Page
：
66
Copyright © 2018 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
