PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 19
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
2.4.1. Connect to the board
When executing the Utility, the tool will try to scan all the necessary PISO-CANFD
series board (including PISO-CAN200U-FD, PISO-CAN400U-FD) and list all scanned
boards name on “Model Name” location of the Utility “Connect” frame.
Before active the board, user can set the CAN port operation mode and CAN baudrate
parameter of the board. Please refer to the following steps to configure the
PSIO-CANFD series board.
Step1: Click the “Connect to …” item to open the “Connect” frame of Utility.
Step2: Select the necessary PISO-CANFD series board.
Step3: On the “CAN Settings” frame of each port, user can set the CAN Bus
prarameters. (The detail functions of these parameters are list below.)
Step4: Press the “Active” buttom to start to use the CAN setting to send/receice
CAN/CAN FD messages.
“Port Enable” :
Enable or disable the selected CAN port.