PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 52
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
DataBitRate
[in] The bit rate configured for the CAN FD data phase in the assigned CAN port
of the PISO-CANFD series card.
Unit: bps (bit per second).
Valid Range: 100000 ~ 10000000 (100 kbps ~ 10000 kbps).
Remark:
The bit rate configured for CAN FD data phase (
DataBitRate
) must be
higher or equal to the bit rate configured for the notmal arbitration phase
(
NormalBitRate
).
NormalSP
[in] Specifies the normal arbitration phase bit rate sample point as a percentage.
The valid range is from 0.00% to 100.00% in intervals of 0.01%. Value 8000
means 80.00%.
DataSP
[in] Specifies the normal data phase bit rate sample point as a percentage. The
valid range is from 0.00% to 100.00% in intervals of 0.01%. Value 8000 means
80.00%.
Return Value
If the function succeeds, the return value will be 0.
If the function fails, refer to Section 3.6 Error Code Definitions.