ICP DAS USA PIO-DA4, User Manual

Page: 60 / 70

A list of available demo programs is as follows:
„ DEMO1.EXE: D/O demo program
„ DEMO2.EXE: D/I/O demo program
„ DEMO3.EXE: Single interrupt source (initial high)
„ DEMO4.EXE: Single interrupt source (initial low)
„ DEMO5.EXE: Two interrupt source
„ DEMO6.EXE: Waveform generator without calibration
„ DEMO7.EXE: Waveform generator with calibration
„ DEMO8.EXE: D/A hex value output without calibration
„ DEMO9.EXE: D/A hex value output with calibration
„ DEMO10.EXE: Save EEPROM data to file
„ DEMO11.EXE: Download EEPROM data from file
„ DEMO12.EXE: User software calibration
„ DEMO13.EXE: Factory calibration
Note: The calibration demos programs can only be used in a
DOS system.
PIO-DA/PISO-DA Series User Manual (Ver.2.9, Feb. 2011, PMH-009-29 )
60