ICP DAS USA PET-7060, User Manual

Page: 56 / 156

Chapter 3 Web Configuration Page
,
PET-7000 DIO User Manual, May 2009, V1.00, EMH-013-10----------
56
There are three methods of restricting or granting access permissions.
z
Allow one specific IP address only
Enter the same IP address in both the “From IP address” and “TO IP address” text fields
z
Allow Hosts within a specific IP address range
Enter the first IP address in the From IP address text field, and enter the last IP address in
the permitted range in the To IP address text field.
z
Allow access from any IP address
Disable IP filter function to allow access to the ET-7000 module from any address.
The “Enable the IP filter table” checkbox must be checked when granting permissions to either
a single IP address or a range of IP address.
: Press this button to enable the settings to take effect.
Note:
The IP filter is set to “disabled” as default; it means that access to the PET-7000
module is allowed from any IP address.