M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
64
2.21 $AA8N
Description:
This command is used to read the current output value for Analog Output
channel N of a specified module.
Syntax:
$AA8N[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
8
The command to be read the current Analog Output value
N
The Analog Output channel to be read, zero based (0-1)
Response:
Valid Command:
!AA(Data)[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
(Data)
The current output value for the specified Analog Output channel.
See Section 1.9.5 for details of the data format.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: #010+01.000
Response: >
Sets the output value for Analog Output channel 0 of module 01 to
+01.000 (+1.0V) and returns a response indicating that the command was
successful.
Command: $0180
Response: !01+01.000
Reads the current output value for Analog Output channel 0 of module 01
and returns a response indicating that the command was successful, with
a value of +01.000 (+1.0 V).
Command: $018F
Response: ?01
Attempts to read the current output value for Analog Output channel 15 of
module 01, but returns a response indicating that the command was
unsuccessful because Analog Output channel 15 does not exist.
Related Commands:
Section 2.5 #AAN(Data), Section 2.17 $AA6N, Section 2.23 $AA9NTS
Related Topics:
Summary of Contents for M-7026
