M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
117
2.56 @AACHi
Description:
This command is used to clear the high latch value for a specific Analog Input
channel of a specified module.
Syntax:
@AACHi[CHKSUM](CR)
@
Delimiter character
AA
The address of the module to be cleared in hexadecimal format (00 to
FF)
CH
The command to clear the high latch value for the Analog Input
channel
i
The Analog Input channel to be cleared, zero based
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: @01RH1
Response: !01+06.000
Reads the high latch value for Analog Input channel 1 of module 01 and
returns a response indicating that the command was successful, with a
value of +06.000 (6.0 V).
Command: @01CH1
Response: !01
Clears the high latch value for Analog Input channel 1 of module 01 and
returns a response indicating that the command was successful.
Command: @01RH1
Response: !01+00.000
Reads the high latch value for Analog Input channel 1 of module 01 and
returns a response indicating that the command was successful, with a
value of +00.000 (0.0 V) signifying that the high latch value has been
cleared.
Command: @01CHF
Response: !01
Attempts to clear the high latch value for Analog Input channel 15 of
module 01, but returns a response indicating that the command was
unsuccessful because Analog Input channel 15 does not exist.
Related Commands:
Summary of Contents for M-7026
