AM335X-PAC Series User Manual version 2.0.4 Page: 123
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
Step 6: Use the ‘
ifconfig
’ command to display the current configuration information for the
network interface, as illustrated in Figure 7.2-3.
Figure 7.2-3.
Checking the IP address that has been assigned to the br0 interface
Step 7: Use the ‘
mstpctl showbridge br0
’ command to verify that the ‘
force protocol version
’ is
set to
RSTP
mode, as illustrated in Figure 7.2-4.
Figure 7.2-4.
Check that the MSTPD service is correctly configured