ICP DAS USA ISaGRAF WinCE ViewPAC, User Manual

Page: 167 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Ap-7
A.6 Connecting PC To VP-2xW7 's COM2 or COM3
The default Modbus RTU slave port of ISaGRAF WinCE ViewPAC is “None”. User may change it to
“COM2:RS-485” or “COM3:RS-232” or “None”. (please refer to
“A.2: Modify The NET-ID & Modbus RTU
port setting” ). Please refer to appendix G & appendix E for more Modbus RTU ports. Default
communication parameter is “19200,8,N,1”
If connecting PC to ViewPAC 's COM2: RS-485, an I-7520 (RS-232/485 converter) is necessary as below.