ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Ap-15
E.
Run “Save and Reboot” to store the setting in step A thru. D and then it will auto-reboot the
ViewPAC once.
3.
After the ViewPAC reboot successfully, please stop the ISaGRAF driver again. (The original VP-25W1
/ 23W1 doesn't have the ISaGRAF driver running, only the VP-25W7 / 23W7 have it)
Note:
If the ISaGRAF driver is still running, the files copied are failed even your eye telling you it is
successful.
4. Download the files from PC to WinPAC directory “
\System_Disk\isagraf\
”
:
(The files listed below are the driver of version 1.01. The files may different in different version.)
isaViewPAC.exe, rs_wphmi.exe
mscorlib.dll, QuickerNet.dll
,
Quicker.dll
,
login.dll
,
main.dll
,
whmi_filter.dll
isaViewPAC.lnk
(and “license.bin” if your ViewPAC is VP-2xW1/4xx1)
And then re-cycle your PAC’s power.
Please open Internet browser and then type in
ftp://<IP address>
, for ex.
it to the \System_Disk\isagraf\. Then copy all of them and past it.
Then remember to re-cycle your ViewPAC 's power again. After it re-boot again, it will have the new
ISaGRAF driver running. You can check if the version is correct.
Summary of Contents for ISaGRAF WinCE ViewPAC
