ICP DAS USA iDCS-8000, Hardware User Manual

Page: 44 / 90

Section 4 I/O Module Analog Input
44
iDCS-8000 Hardware User Manual (2013/8/14, Rev: 1.43)
4.4.2 F-8017C1
4.4.2.1 Overview

8 current input channels

Overrange measurement

RoHS compliance

3000 V
DC
isolation from input to backplane

3000 V
DC
isolation from input to frame ground

Redundancy

Fast redundant switching time (<100us)
The F-8017C1 is a 16-bit, 8-channel analog differential input module. This module accepts current input
range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has
±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for
some application. The F-8017C1 provides 3000VDC optical isolation between channels and backplane bus.
If any high voltage or current damages these channels, this module won’t affect other component in
iDCS-8000 system.
4.4.2.2 Specification
Parameter Value
Feature
Redundant Yes (Switching time < 100us)
Over-Current Protection Yes
Termination board break off detection Yes
LED indicator 1 RUN, 1 ACT, 1 DUX
Analog Input
Number of channels 8
Type 4~20 mA (Support ±25% overrange)
Maximum Allowable Input Current 25mA
Resolution 16 bit
Sampling Rate 500 Samples/sec (Total)
Accuracy ±0.05% FSR
Zero Drift ±20
μ
V/℃
Span Drift ±25 ppm/℃
Common Mode Rejection 86 dB
Normal Mode Rejection 100 dB