Section 1 Introduction
Hardware List
10
iDCS-8000 Hardware User Manual (2013/8/14, Rev: 1.43)
1.4
Hardware List
The equipment that is used as part of the iDCS-8000 station is presented in the following table.
Type
Module Name
Description
Communication Module FCM-MTCP
Modbus/TCP Communication Module
Power Module
FPM-D2440
24VDC Input，35W@5VDC Output
Digital I/O
Digital
Input
F-8040
32 digital input channels, current sinking / sourcing, one
common for 32 channels
Digital
Output
F-8041
32 digital output channel, current sinking, open collector
Analog I/O
Analog
Input
F-8015
8 analog input channels, 3-wire RTD, Pt100, Pt1000
F-8017C1
8 differential analog input channels, 4~20mA, with loop
power for passive loop
F-8017C2
16 differential analog input channels, 4~20mA
F-8017CH
8 differential analog input channels, 4~20mA, HART
interface, with loop power for passive loop
F-8019
8 analog input channels, Thermocouple, mV, ±5V, ±10V
Analog
Output
F-8028CV
8 analog output channels, 4~20mA, ±5V, ±10V
F-8028CH
8 analog output channels, 4~20mA, HART interface
Termination Board
DN-DIO-M
Termination board for digital I/O modules
DN-DI-32DW
Termination board for digital input modules
DN-DO-16DR-A
Termination board for digital output with power relay for
channel 0~15
DN-DO-16DR-B
Termination board for digital output with power relay for
channel 16~31
DN-AIO-M
Termination board for analog I/O modules
DN-AIH-04
Termination board for HART analog input module
DN-RTD-M
Termination board for RTD I/O modules
DN-TC-M
Termination board for Thermocouple I/O modules
Accessories
4SIPP-801W-CAG Dummy I/O cover
FRMK
19” mounting panel
CA-01
D-Sub 37pin Female-Male 1m Cable，24AWG，180
。
UL-2464
CA-02
D-Sub 37pin Female-Male 2m Cable，24AWG，180
。
UL-2464
CA-03
D-Sub 37pin Female-Male 3m Cable，24AWG，180
。
UL-2464
CA-05
D-Sub 37pin Female-Male 5m Cable，24AWG，180
。
UL-2464
CA-10
D-Sub 37pin Female-Male 10mCable，24AWG，180
。
UL-2464
