GW-7557 PROFIBUS/HART Gateway User Manual
(Version 1.00, Dec/2011)
PAGE: 5
1.1 Features
●
16-bit Microprocessor inside with 80MHz
●
Profichip VPC3+C PROFIBUS controller
●
Support PROFIBUS DP-V0 slave
●
PROFIBUS transmission rate detect automatically
●
Max transmission speed up to 12 Mbps for PROFIBUS and 115.2 kbps for
COM Port
●
COM Port driver has 1K bytes QUEUE input buffer & 512 bytes QUEUE
output buffer
●
Allow two HART masters
●
Working in point-to-point or multi-drop HART mode
●
Support 4 HART channels
●
Connecting up to 15 HART slave devices per HART channel
●
Support HART Short/Long frame
●
Support HART burst mode
●
2500Vrms High Speed iCoupler Isolation Protection for PROFIBUS network
●
3000V
DC
Isolation Protection on the PROFIBUS side
●
Provide LED indicators
●
Built-in Watchdog
●
Mountable on DIN Rail
1.2 Specification
COM Port specs:
●
Serial port - RS-232
●
Serial port interface: screw terminal block
●
Baud Rate
:
2400/4800/9600/19200/38400/57600/115200 bps
●
Data Format: 7/8 data bits, None/Odd/Even parity bit, 1/2 stop bit
PROFIBUS specs:
●
PROFIBUS interface connector: D-Sub 9-pin female
●
Baud Rate: 9.6k/19.2k/45.45k/93.75k/187.5k/500k/1.5M/3M/6M/12Mbps
●
Address Setting: 0~126 (set by DIP switch or EEPROM)
HART specs:
●
4 HART channels
●
HART port interface: screw terminal block
●
Working in point-to-point or multi-drop HART mode
●
Connecting up to 15 HART slave devices per HART channel
●
Support HART Short/Long frame
●
Support HART burst mode