GW-7557 PROFIBUS/HART Gateway User Manual
(Version 1.00, Dec/2011)
PAGE: 29
the below:
Command 1 module parameters
:
●
Channel Number
:
Channel 2
●
Device Number
:
Device 0
●
Output Mode
:
Polling
Example 2:
If the user wants to enable burst mode and read primary variable by using burst
mode. HART slave device connects with HART channel 3 of GW-7557, preamble
length is 5
、
long address is 0xFB 0x01 0x00 0x12 0x67, network type of HART
channel 3 is point to point.
In this case, the user should select the following modules:
1.
Transparent mode
:
The user can select a “8 Words Output module” and a “8 Words Input module”.
2.
Compact mode
:
The user can select a “Command 108 module”
、
a ”Command 109 module”
and a “Command 1 module” , module parameters are shown in the below:
Command 108 module parameters
:
●
Channel Number
:
Channel 3
●
Device Number
:
Device 0
●
Output Mode
:
Manual
Command 109 module parameters
:
●
Channel Number
:
Channel 3
●
Device Number
:
Device 0
●
Output Mode
:
Manual
Command 1 module parameters
:
●
Channel Number
:
Channel 3
●
Device Number
:
Device 0
●
Output Mode
:
Burst
PS
:
a.
Channel Number
:
This parameter will decide HART channel of HART