Chapter 4
iCAM-7
60D User’s Manual ICP DAS
Setup
70
4.4.1 Motion Tab
From the
Motion
tabbed pane, you can define specific target areas within the
scope of surveillance to focus the motion detection function.
Defining a single motion detection area
:
1) Enable the
Enable Motion Detection
check box.
2) Click
Add
button and a default frame
Region00
will pop-up on the screen.
3) Click and hold inside the frame to drag it to the location where you want to
focus detection. Resize the frame by dragging its corners or borders.
4) Click the
Save
button to apply.
Defining multiple motion detection areas
:
1) After satisfactory positioning of the first detection area as described above,
click the
Add
button again. A second default frame will pop-up on the
screen. Drag & resize the frame at the desired location.
2) Repeat the above step to add more detection area frames.
NOTE
Total defined motion detection areas cannot exceed
10
windows(regions).
1. To enable
“
Motion Detection
”
function.
2. To draw a region to define the detection
range.
