Chapter 3
iCAM-771
User’s Manual ICP DAS
Camera Live View UI Settings
33
Preset Point
:
,
,
After panning and zooming, assign the
selected area a Preset Point (
1 to 4
) and click
Save
button to store the setting. The
pre-defined point of view areas will be
monitored in sequence. To cancel the
selection, click
Remove
button.
Auto Patrol
: While Preset Points are set, you could
check
function to execute. Then
the camera view would automatically start to
go to the preset locations in sequence
(1->2->3->4) with the configured
Time
Lapse
value. Uncheck it, Auto Patrol
function would stop.
※
Note that Auto Patrol function are
dependent with camera hardware also.
Means if camera hardware on your hand
isn’t upgrade or supported these two
functions may not be visible to let you
choose.
Zoom Button
:
Click
button to zoom-in and
button to zoom-out the selected scene. Zoom
setting is saved with the selected pre-defined
point of view area.
