Chapter 2
iCAM-771
User’s Manual ICP DAS
17
Installation and Setup
2.4 Configuring Camera via CAM FINDER
The user can configure iCAM by default IP address or via the software utility.
The default IP Address configuring: see
2.3 Connecting Camera to Network
The software utility
CAM FINDER
is in the attached Software Package CD.
The
CAM FINDER
is used to find and configure network cameras on the LAN.
This utility is useful for conveniently configuring the network settings of the
device, or for finding a device once the network settings have been modified.
The
CAM FINDER
programs are located in the Software
iCAM CD
provided
together with the device. Please insert the CD into the PC CD-ROM Drive, open
the folder
“Software_Utility”
and then
“CAM FINDER”
. Launch the
CAM
FINDER
setup file
“setup.exe”
and complete the installation step by step.
iCAM CD Path: \Software_Utility\Cam Finder\
The latest version of the
CAM FINDER
software program is available on the
iCAM
product website:
http://wise.icpdas.com/products/iCAM.html
Or directly download from the following FTP path:
http://ftp.icpdas.com/pub/cd/iCAM/Software_Utility/Cam Finder/
NOTE
1. In order to ensure CAM FINDER utility has the best compatibility with
Camera, kindly please ask for distributor/dealer’s help to get the latest
version downloading.
2. In order to ensure Camera will be assigned IP Address properly, please
confirm the following things.
Always consult your network administrator in order to avoid using a
previously assigned IP address.
Check if the Camera is powered on and correctly connected to the
network.
In order to connect to the Web-based user interface of the camera, the
host PC must be in the same subnet. For more information about
subnets, please consult your network administrator.
