CN1~CN4
(The I/O signals of the X, Y, Z, U AXIS )
The connectors CN1~CN4 are 11-pin connectors that enable you to connect to the signals of
your motor drivers. Fig.1-7 shows the pin assignment for the 20-pin connector on the DN-8468P,
and the Table 1-8 shows its I/O connector signal description.
CN5~CN8 (The I/O signals of the X, Y, Z, U AXIS )
The connectors CN5~CN8 are 15-pin connectors that enable users to connect the signals to
external motor drivers. Fig.1-8 shows the pin assignment for the 15-pin connector on the
DN-8468P, and the Table 1-9 shows its I/O connector signal description.
http:/www.icpdas.com I8094Getting Started ManualVer.2.0 2007/6/28
81