I-7540D-WF CAN to Wi-Fi Converter User’s Manual (Ver. 2.0, Jan/2012) ------------- 26
Ad-Hoc Mode
：
Operation Mode
Server
：
Set I-7540D-WF for the TCP Server mode.
Client
：
Set I-7540D-WF for the TCP Client mode.
Wi-Fi Mode
Ad-Hoc
：
Use Ad-Hoc connectivity with another I-7540D-WF to create AD-
hoc wireless network.
SSID
Service Set Identifier: Connected devices must be with the same SSID, SSID
length must not exceed 20 characters.
WLCH
1~13
：
Wi-Fi transmission channel setting, connected devices must with the
same channel, can’t setting 0 (Auto) channel in Ad -Hoc mode.
Encryption
NONE / WEP64 / WEP128: Wi-Fi Encryption of Wi-Fi
,
connected devices
must with the same encryption.
Not Support WPA
、
WPA2 encryption in Ad-Hoc mode
。
WLK
Key of Encryption
，
connected devices must with the same Key
.
WEP-64
：
Key length must be 10 characters.
WEP-128
：
Key length must be 26 characters.
Characters of key should be in range of: [0 ~ 9] or [A ~ F] or [a ~ f].
Parameter Transmission Interface
I-7540D-WF's parameter connection configuration interface
provides wireless and RS-232 interface for connection, RS-232
interface provides upload and download parameter function; wireless
interface only provides upload parameter function as following.
Figure
3-5:
Parameter Transmission Interface
Parameter Transmission status bar
I-7540D-WF utility provides the parameter transmission status display
interface. By the status bar, the user can immediately understand the
transfer state.
Figure
3-6
:
Parameter Transmiss
ion
status bar
