I-7540D-WF CAN to Wi-Fi Converter User’s Manual (Ver. 2.0, Jan/2012) ------------- 20
Table 2-4-2: Display contents
Display title
Display contents
Display information
Operation Mode
setting
(Client / Server)
Wi-Fi Connection
Mode setting
(Ad-Hoc / AP)
Wireless Connection
Channel setting
(0~13)
Wi-Fi Encryption
setting
(Disable / WEP-64 /
WEP-128 / WPA /
WPA2)
CAN Baud Rate
setting
(5K~1000K)
2.9 Cable Selection
The CAN bus is a balanced (differential) 2-wire interface running over
either a Shielded Twisted Pair (STP), Un-shielded Twisted Pair (UTP), or
Ribbon cable. The CAN-L and CAN-H Wire start on one end of the total
CAN network that a terminator of 120 Ohm is connected between CAN-L
and CAN-H. The cable is connected from CAN node to CAN node,
normally without or with short T connections. On the other end of the cable
again a 120
Ω
(Ohm) terminator resistor is connected between the CAN
