I-7540D-WF CAN to Wi-Fi Converter User’s Manual (Ver. 2.0, Jan/2012) ------------- 33
users can send this message to CAN network via WLAN by using
“Send” button.
Modify:
If users want to modify the content of some CAN message in the
transmission list, they can select this CAN messages in the
transmission list firstly. Then, this CAN message information will
be shown in the text boxes above the transmission list. Users can
modify the CAN message in these text boxes directly. Finally, click
“Modify” button to save the modification in the list.
Delete:
If some CAN message in the transmission list is useless, users can
select it and click “Delete” button to delete this CAN message from
transmission list.
Send:
After users select one CAN message from transmission list, click
“Send” button to send this CAN message once from the selected
CAN port. If the timer parameter of this CAN message is not 0, the
CAN message will be sent depending on this timer parameter
periodically. In this case, the status filed of this CAN message in
transmission list will display “Running”, and the text shown on the
Send button will be changed to “Pause”. If uses want to stop the
message transmission, click this button again. There are only 5
CAN messages can be sending cyclically at the same time.
Clear Count:
Right of the display area will record the counter of CAN transfer
packets. If users want to clear this transfer count, click on "Clear
Count" button.
