ICP DAS USA I-7521, User Manual

Page: 67 / 148

I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User’s Manual,Ver2.5 Aug.2015
67
Chapter 5 Command Sets
5.1 Command Set Table
Command Response Description Reference
$AAA[addr]
!AA
Read/Set the Module Address Sec. 5.3.1
$AABN[baud rate] !AA[baud rate] Read/Set the Baud Rate for COM-1/2/3/4/5/6/7/8 Sec. 5.3.2
$AADN[data-bit] !AA[data-bit] Read/Set the Data Bit for COM-1/2/3/4/5/6/7/8 Sec. 5.3.3
$AAPN[parity-bit] !AA[parity-bit] Read/Set the Parity Bit for COM-1/2/3/4/5/6/7/8 Sec. 5.3.4
$AAON[stop-bit] !AA[stop-bit]
Read/Set the Stop Bit for COM-1/2/3/4/5/6/7/8 Sec. 5.3.5
$AA6[ID]
!AA Set the ID-string for COM-1/3/4/5/6/7/8 Sec. 5.3.6
$AA7 !AA[ID] Read the ID-string for COM-1/3/4/5/6/7/8 Sec. 5.3.7
$AAC[delimiter] !AA[delimiter] Read/Set the delimiter for COM-1/3/4/5/6/7/8 Sec. 5.3.8
$AAD !AA[delimiter] Read the delimiter for COM-1/3/4/5/6/7/8 Sec. 5.3.9
(delimiter)AA(bypass) Depend on device Bypass the data string to COM-1/3/4/5/6/7/8 Sec. 5.3.10
$AAKV !AA[checksum] Read/Set the checksum status of COM2 (RS485) Sec. 5.3.11
$AATN[CrLfmode] !AA[CrLfmode] Read/Set the end char which is used to judge the
end of command/response for COM1/2/3/4/5/6/7/8
Sec. 5.3.12
$AAW !AA(status) Read the CTS_status of COM-1/3/4/5 Sec. 5.3.13
$AAXV !AA Set the RTS_state of COM-1/3/4/5 Sec. 5.3.14
$AAYN !AA(status) Read the onboard DI-1/2/3/4/5 Sec. 5.3.15
$AAZNV !AA(status) Read/Set the onboard DO-1/2/3/4/5 Sec. 5.3.16
#** No Response Synchronized Sampling Sec. 5.3.17
$AA4 !AASV Read the synchronized data Sec. 5.3.18
$AA5 !AAS Read the Reset status Sec. 5.3.19
$AAF !AA[number] Read the firmware version number Sec. 5.3.20
$AAM !AA[name] Read the module name Sec. 5.3.21
$AA2 !AABDPK Read the configuration of COM2 (RS485) Sec. 5.3.22
~** No Response Host is OK Sec. 5.3.23
~AA0 !AASS Read the module status Sec. 5.3.24
~AA1 !AA Reset the module status Sec. 5.3.25
~AA2 !AASTT Read the host watchdog status and value Sec. 5.3.26
~AA3ETT !AASTT Enable the host watchdog timer Sec. 5.3.27
~AA4P/~AA4S !AAV Read the power-on/safe value Sec. 5.3.28
~AA5P/~AA5S !AAV Set the power-on/safe value Sec. 5.3.29