ICP DAS USA I-7521, User Manual

Page: 74 / 148

I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User’s Manual,Ver2.5 Aug.2015
74
5.3.4 $AAPN[parity-bit]

Description :
This function reads/sets the parity bit for COM 1/2/3/4/5/6/7/8
$AAPN [chk](CrLf)

Reads the parity bit for COM 1/2/3/4/5/6/7/8 stored in
the EEPROM
$AAPN[parity-bit] [chk](CrLf)

Sets the parity bit for COM 1/2/3/4/5/6/7/8

Syntax :
$AAPN[parity-bit][chk](CrLf)
$
Delimiter character
AA 2-character module address in HEX format. The valid range is from
00 to FF
N=0 Reads/Sets the parity bit for the COM 2
N=1 Reads/Sets the parity bit for the COM 1/3/4/5/6/7/8
[parity-bit] 0=NONE, 1=EVEN, 2=ODD
[chk]
2-character checksum. If the checksum is disabled

no [chk]
(CrLf) End Character

Response : valid command

!AA[parity-bit][chk](CrLf)
invalid command

?AA[chk](CrLf)
no response

syntax error, communication error, or address error
! Delimiter character indicating a valid command
? Delimiter character indicating an invalid command
AA 2-character module address in HEX format
[chk] 2-character checksum. If the checksum is disabled

no [chk]
(CrLf) End Character

Example : (Assume the AA address value of the I-7523 module is 01)
command: $01P00(CrLf)
response : !01(CrLf)
command: $01P10(CrLf)
response : !01(CrLf)
command: $02P11(CrLf)
response : !02(CrLf)
command: $03P12(CrLf)
response : !03(CrLf)
Changes parity-bit to NONE for RS-485 (COM2)
Changes parity-bit to NONE for RS-232 (COM1)
Changes parity-bit to EVEN for RS-232 (COM3)
Changes parity-bit to ODD for RS-232 (COM4)
For: I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527