ICP DAS USA I-7521, User Manual

Page: 68 / 148

I-7521/I-7522/I-7522A/I-7523/I-7524/I-7527 User’s Manual,Ver2.5 Aug.2015
68
$AAU [data] Read data from the RS-232 COM port buffer. Sec. 5.3.30
$AAL[data] !AA Write to the expansion board DO-0/1/2/3 Sec. 5.3.31
$AAR !AA[data] Read the expansion board DI-0/1/2/3 Sec. 5.3.32
$AAJN[timeout] !AA[timeout] Read/Set the delay time to determine whether the
end of a command/response was been transmitted
/receiver
Sec. 5.3.33
$AAGN[trigger level]
!AA[triggerlevel] Read/Set the Trigger Level Sec. 5.3.34
@AA[data] >AA[data] Read/Set the onboard DI/DO-1/2/3/4/5 Sec. 5.3.35
#AABBHH > Set the multiple onboard DO-1/2/3/4/5 Sec. 5.3.36
#AABCDD > Set the single onboard DO-1/2/3/4/5 Sec. 5.3.37
$AAEV !AA(status) Read/Set prefixed address status on the response.
(Supported by the firmware version 3.05 and
upward)
Sec. 5.3.38
$AAHV !AA(status) Read/Set the status for bypassing the data string to
COM2.(Supported by the firmware version 3.08
and upward)
Sec. 5.3.39
$AAIV !AA Restore factory default setting.
(Supported by the firmware version 3.08 and
upward)
Sec. 5.3.40
5.2 Address Mapping Table
I-7521 I-7522 I-7523 I-7522A I-7524 I-7527
COM1 (RS-232)
AA AA AA AA AA AA
COM2 (RS-485)
AA AA AA AA AA AA
COM3 (RS-232)
/(RS-422)
N/A AA+1 AA+1
AA+1
(RS-422)
AA+1 AA+1
COM4 (RS-232)
N/A N/A AA+2 N/A AA+2 AA+2
COM5 (RS-232)
N/A N/A N/A N/A AA+3 AA+3
COM6 (RS-232)
N/A N/A N/A N/A N/A AA+4
COM7 (RS-232)
N/A N/A N/A N/A N/A AA+5
COM8 (RS-232)
N/A N/A N/A N/A N/A AA+6