ICP DAS USA GRP-540M Series User Manual Download

Page: 34 / 82

GRP-530M / GRP-540M User Manual

Version 1.2.1

Page

：

3.6 RTU Client

The user can configure RTU Client function here. The RTU Client function will connect to RTU

Center, please refer the website for more information.

3.6.1 RTU Client

The user can configure RTU Client firmware function here. There are three tabs:

(1) Main Info. (2) Modbus Number (3) FTP/Email

◼

Main Info. Tab:

(1) Server Address: Server IP or Domain Name.

(2) Server Port: the port of the server.

(3) Station ID: the ID for this device. (do not be the same with other RTU device)

(4) Data Update Period (sec.): set report time interval. The device will report all data to

RTU Center every interval time your setting.

(5) Heartbeat Period (sec.): set heartbeat time interval. 3G/GPRS connection will be

Summary of Contents for GRP-540M Series
















































































Search results

Summary of Contents for GRP-540M Series

Reviews:

Related manuals for GRP-540M Series

Brands by name

Popular brands

ICP DAS USA GRP-540M Series, User Manual

Search results

Summary of Contents for GRP-540M Series

Reviews:

Related manuals for GRP-540M Series

Brands by name

Popular brands