GRP-530M / GRP-540M User Manual
Version 1.2.1
Page
：
18
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
．
Mode: AP
．
SSID: the name shows up in Wi-Fi station
．
MAC address: a unique identifier assigned to network interfaces
．
IP Address: the IP address which is set by user
．
Mask: the Mask which is set by user
．
Security: the mode of AP's security. Please refer to below:
No security: any Wi-Fi stations can access this AP without password
WPA2-PSK: use WPA2-PSK security mode, Wi-Fi stations use password to access
．
Password: only show out with WPA2-PSK security mode
Station Mode:
．
Mode: Station
．
Connected SSID: the AP which is connected by this station
．
MAC address: a unique identifier assigned to network interfaces
．
IP Configure: use which method to get IP address. Please refer to below:
Static: user can set IP address, Mask, and Gateway by himself
DHCP: get IP address, Mask, and Gateway from AP's DHCP server
．
IP Address: the station's address under the Internet Protocol
．
Mask: Mask will be provided from AP provider
．
Status: the connection status. Please refer to below:
Connected: this station already connected to remote AP successfully
Connecting: this station is trying to connect with remote AP
．
Signal Level (dbm): close to 0 dbm is better, but 0 dbm means still try to connect
(3)
Mobile Network information: the information will show out after dial up
．
Status: “connected” mean the modem dial-up success.
．
IP Address: the IP is provide by ISP provider.
．
P-t-P: provide by ISP provider.
．
IP Address for VPN: the IP is provide by VPN Server.
．
P-t-P for VPN: provide by VPN Server.
(4)
Modem information:
．
SIM Select: The SIM which has been used now. (Only show up in GRP-541M)
．
IMEI: IMEI number of 4G module.
