ET-2200 Series Ethernet I/O Modules
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
65 -
Step 4: Configure the I/O Pair connection on the ET-2260 #2 module
1.
In the eSearch Utility, select
ET-2260 #2
module
and then click the
Web
utto to lau h the
browser program and connect to the web server.
2.
Enter the password in the Login password field
(the
default password is
Ad i
, and then
click the
“u
it
button to display the configuration page.
3.
Click the
Pair Co e tio
tab to display the I/O Pair-connection Settings page.
Refer to Figures 5-1.3 to 5-1.4 for illustrations of how to perform the above procedure.
4. In the I/O Pair-connection Settings , select
PUSH
fro the
Mode
drop
-down options.
5. Enter the
IP address for ET-2260 #1 module
in the
Remote IP
field.
6. Enter the
TCP Port for ET-2260 #1 module
in the
Remote Port
field.
7. Enter a
DI Count Value for ET-2260 #2 module
i the
DI Count
field
(Local DI to Remote DO).
For example, enter
1
in the
DI Cou t
field. This means
DI x1 of ET-2260 #2 module
is mapped
to
DO1 x of ET-2260 #1 module
.
8. Select
Modbus protocol (e.g., TCP )
from the
TCP/UDP
drop-down options.
9.
Cli k the
Submit
utto to o plete the o figuratio .
Figure 5-2.4
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
