ET-2200 Series Ethernet I/O Modules
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
53 -
DO Addr
For
POLL
mode, this parameter specifies the base address of
the
Local DO register
that will be mapped to the
Remote DI
device
. The range depends on the type of the ET-2200 module
being used.
For
PUSH
mode, this parameter specifies the base address of
the
Remote DO device
that will be mapped to the
Local DI
register
. The range depends on the type of remote device being
used.
0
TCP/UDP
This parameter is used to set the type of Modbus protocol to be
used and can be either TCP or UDP
for the PUSH mode only
.
TCP
Update
Click
Submit
button to save the revised settings to the ET-2200 module.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
