ICP DAS USA ET-2217CI User Manual Download

Page: 1 / 140

ET-2200 Series Ethernet I/O

Modules User Manual

Ethernet I/O Module Ver. 1.6.0, Oct. 2021

ARRANTY

All products manufactured by ICP DAS are warranted against

defective materials for a period of one year from the date of

delivery to the original purchaser.

ARNING

ICP DAS assumes no liability for damages consequent to the

use of this product. ICP DAS reserves the right to change this

manual at any time without notice. The information

furnished by ICP DAS is believed to be accurate and reliable.

However, no responsibility is assumed by ICP DAS for its use,

nor for any infringements of patents or other rights of third

parties resulting from its use.

OPYRIGHT

RADEMARK

Names are used for identification only and may be

registered trademarks of their respective companies.

ONTACT

If you have any questions, please feel free to contact us via

email at:
[email protected]

UPPORT

This manual relates to the following

modules:

AI:

ET-2217CI-4, ET-2217CI

DI/DO:

ET-2242, ET-2242U, ET-2251, ET-2254,

ET-2254P, ET-2255, ET-2255U, ET-2260,

ET-2261, ET-2261-16, and ET-2268

Summary of Contents for ET-2217CI




































































































































Search results

Summary of Contents for ET-2217CI

Reviews:

Related manuals for ET-2217CI

Brands by name

Popular brands

ICP DAS USA ET-2217CI, User Manual

Search results

Summary of Contents for ET-2217CI

Reviews:

Related manuals for ET-2217CI

Brands by name

Popular brands