ECAN-200-FD (Ethernet to 2-port CAN FD Converter) User Manual
Version 1.0.0
Page
：
16
Copyright © 2022 ICP DAS Co., Ltd. All Rights Reserved E-mail: [email protected]
3.2. Configuring the Network Settings
1. Downloaded the eSearch Utility and installed according to the
installation instructions. The eSearch Utility can be obtained from the
ICP DAS web site. The location of the install files on the download
address is shown below:
https://www.icpdas.com/tw/download/show.php?num=6710&nation=
Note: The version of the eSearch Utility to be v1.3.0 or later.
2. Open the eSearch Utility and then click the
“Search Server”
button to search for the
ECAN-200-FD module.
3. Once the search process is complete, double-click the name of the ECAN-200-FD module to
open the
“Configure Server”
dialog box.
4. Enter the network settings information, including the IP, Mask and Gateway addresses, and
then click “OK” button. The new settings for the ECAN-200-FD will take effect within 2
seconds. If you don’t know the correct network configuration information, contact your
Network Administrator to obtain the details.
