ICOP 20/20 VISION™
Revision: 005
10
August, 2011
Ignition Power
While viewing the ICOP 20/20 VISION from the front, place the Power On Setting
Switch in the left position (position 1) as shown in Fig. 1-1. The ICOP 20/20 VISION
powers on automatically when the vehicle ignition is turned on, but can still be
powered on manually when the ignition is not turned on.
The ICOP 20/20 VISION has a power-saver mode that turns off the unit when no
function is used for the amount of time set in the Poweroff Timeout section of the
System screen. This setup overrides the power-saver functionality while the ignition
is turned on. When the ignition is turned off, power-saver mode activates after the
last function has been performed by the unit.
Note: When a recording is activated, the ICOP 20/20 VISION continues to record even when
the ignition is turned off. The recording must stopped for power-saver mode to be
activated.
Note: When the ignition is turned off, the key is removed, and the radio is left on, power-
saver mode activates and the radio is shuts off after the amount of time set in the
Poweroff Timeout section of the System setup elapses after non-usage.
Manual Power
While looking at the ICOP 20/20 VISION from the front, place the switch in the right
position (setting 2) as shown in Fig. 1-2. When the Power On Setting Switch is set
to manual power, the unit must be manually powered on and off regardless of
whether or not the ignition is turned on.
Note: When a recording is activated, the ICOP 20/20 VISION continues to record even when
the ignition is turned off. The recording must stopped for power-saver mode to be
activated.
Important
Whether the switch is in position 1 or 2, the ICOP 20/20 VISION must be turned off manually.
Power-saver functionality takes affect after the last function has been performed by the unit.
Summary of Contents for 20/20 Vision
Page 2: ......
