SUPERVISOR SETUP MANUAL
Revision: 005
13
August, 2011
ICOP 20/20 VISION INITIALIZATION
After the ICOP 20/20 VISION is powered on it goes through an initialization
process. During this process the unit locates the last recorded event and searches
for a starting point. When a starting point it is found the monitor shows the
following information:
Initialization Screen Contents
13H:
Total Accumulated HDDM time of recordings
11:29:47:
Record time left on the HDDM
M0140, D0130, F2049: Software version currently in use
Summary of Contents for 20/20 Vision
Page 2: ......
