T e c h n i c a l S p e c i f i c a t i o n s
Model:
Sensitivity:
Freq. Range:
Max SPL@100 ft (30.5 Meters):
Peak:
Program:
Horizontal Dispersion:
Aiming Angle:
Vertical Dispersion:
Typical Throw:
Beam Control (down to):
№. Transducers:
№. Amp Ch:
Dimensions (W/ Mtg. Hinges)
Height (inch / cm):
Width (inch / cm):
Depth (inch / cm):
Weight (lbs / kg):
Power Required
Idle:
At Rated Power Output:
Hanging Method:
Enclosure:
Transducers:
Inputs:
Controls (Rear Mounted):
Computer Controls:
Status Indicators:
Finish:
IC8-R-II IC16/8-R-II IC16-R-II IC24-R-II IC32/16-R-II IC32-R-II
1.0 Volts for Rated Power Output
120 Hz to 18 kHz
96 dB 96 dB 99 db 102 db 100 db 103 db
93 dB 93 dB 96 db 99 db 97 db 100 db
150
o
up to 3 kHz, 120
o
above 3 kHz
Adjustable from –30
o
to +30
o
, except –10
o
to +10
o
on IC16/8-R-II & IC32/16-R-II
20°, 25° & 30° 10°, 15° & 20° 10°, 15° & 20° 5°, 10° & 15° 5° & 10° 5° & 10°
66 ft (20 m) 135 ft (40 m) 135 ft (40 m) 195 ft (60 m) 270 ft (80 m) 270 ft (80 m)
800 Hz 400 Hz 400 Hz 250 Hz 200 Hz 200 Hz
8 16 16 24 32 32
8 8 16 24 16 32
37 5/8 / 96 74 3/4 /190 74 3/4
/190 111 7/8 / 284 149 / 378 149 | 378
6 1/8 / 15.5
6 5/8 / 14.9
36 / 16.3 62 / 28.1 72 / 32.7 108 / 48.9 124 / 56.2 144 | 65.3
24 VA 24 VA 48 VA 72 VA 48 VA 96 VA
325 VA 325 VA 650 VA 975 VA 650 VA 1300 VA
2-point hinge (3-point on the IC24-R-II, IC32/16-R-II & IC32-R-II) or M6 eye-bolts.
Extruded aluminum with perforated steel grille; suitable for outdoor use.
Coaxial with a 4” woofer and dual 1” tweeters, RH model SSL4-7, 50 Watts program
Analog Audio: Dual inputs (primary & secondary), Phoenix 6-pin connectors (looping 3-in, 3-out)
CobraNet: Dual RJ45 connectors (for CAT 5 copper cable)
AES/EBU: Phoenix 6-pin connector
Power: IEC power connector
Mute button, Up & Down Output Level push buttons,
10 dB Input pad (on Analog 1 input)
Push-To-Reset circuit breaker
Preset Configuration Selector (10 configurations)
Gain, Mute, On/Standby, Input Selection; Compression, 8-Band Parametric EQ,
Shelving & Roll Off Filters, Delay, Preset Configuration Selection
Power, Signal, Overdrive, Thermal, Mute, Input Pad, Beam Preset Readout
Standard finish: White paint. Optional finishes: Black and custom color paint, weather resistant
Type:
Input Impedance:
Max Input:
Power Rating:
Freq. Range:
THD Distortion:
Hum & Noise:
8-channel, Class D amplifier/DSP processor; 1 in IC8-R-II & IC16/8-R-II, 2 in IC16-R-II &
IC32/16-R-II, 3 in IC24-R-II & 4 in IC32-R-II
>20K Ohm balanced differential
+24 dBu (Pad in);+14 dBu @ 1 V sensitivity (Pad out)
50 Watts RMS per channel
+ 3, - 3 dB, 100 Hz to 20 kHz
< 0.05% typical
<100 dB (A weighted)
D S P / A m p l i f i e r
Users Manual
IC-R-II
76
Summary of Contents for IC-R-II Series
Page 79: ...Users Manual IC R II ...