manualshive.com logo in svg

iConyx IC-R-II Series, User Manual

Share
Download
iConyx IC-R-II Series User Manual Download Page 60

Users Manual 

                 

IC-R-II

60

APPENDIX IV: KEEPING YOUR RHAON PROGRAM UP-TO-DATE

Updating DSP Firmware  

 

The latest 48 kHz DSP firmware files (.bin files) were installed in your array before it was shipped to you, unless you specifically requested 

96 kHz files be installed.. These files contain the loudspeaker specific EQ, crossover and protection settings for the loudspeaker and are 

updated from time to time as the firmware is improved. 

If your system was set up to operate at 48 kHz and you want to run at 96 kHz, you will need to install the 96 kHz .bin files for your 

loudspeaker(s). 

If you are having problems with your system, we may ask you to update the .bin files as part of troubleshooting, To download the latest .bin 

files, go to Check for Firmware under the Help pull down menu. See page 57. Be aware that .bin files names which start with RH4... are 48 

kHz files; 96 kHz files start with RH9...

Important: When upgrading previous versions of the Microcontroller and DSP firmware to the latest version, it is critical that the 

Microcontroller firmware be upgraded first.

Step 1: In RHAON, right-click on one of the loudspeaker listings in the directory tree view or on the loudspeaker’s icon in the main display 

area and select “Update DSP Firmware…”. The pop up menus are the same ones we explored on page 58 under Updating Microcontroller 

Firmware.

Selecting Update DSP Firmware will open the window shown below. Notice that the program lets you know what firmware is installed in the 

loudspeaker.

Step 2: Select the appropriate firmware to download and press “Download”.  If no listings appear in the white field, it’s a sign that you have 

not downloaded any .bin files for that loudspeaker from the web and placed them in the DSP_Firmware folder.

Summary of Contents for IC-R-II Series

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands