iConyx IC-R-II Series User Manual Download Page 47

Page: 47 / 80

Do not stand the loudspeaker upright or lay it on its side on the floor.

To ensure proper air movement for the cooling of the amplifier module, we recommend a minimum of 2 to 3 feet of clearance in front of the

loudspeaker and 1 inch of clearance from the other cabinet surfaces.

Installation should only be performed by skilled personnel

These loudspeakers are intended to be securely mounted using the Renkus-Heinz, Inc. HK Series hinge kits and are not intended to be

free-standing:

Array models IC8-R-II, IC16-R-II & IC16/8-R-II

Hinge Kit Model HK-IC8R &16R

Array models IC24-R-II, IC32-R-II & IC32/16-R-II

Hinge Kit Model HK-IC24R &32R

The wall mounting kits have been evaluated for wall mounting on 1/2” drywall on 2x4 studs using wood bolts secured into a 2x4 stud plus

toggle bolts into the 1/2: drywall. Wood bolts: ¼” dia. x 1-½” long, 6 TPI, with ½” head; 1/4” toggle bolts.

These loudspeakers have not been evaluated for safety requirements using other mounting kits.

HARDWARE REQUIRED:

- Array models IC8-R-II, IC16-R-II & IC16/8-R-II

Four – 1-½” x ¼” Wood bolts with ½” head and 6 threads per inch

Four – 1/4” Toggle bolts

One – Renkus-Heinz, Inc. Hinge Kit Model HK-IC8R &16R

- Array models IC24-R-II, IC32-R-II & IC32/16-R-II

Six – 1-½” x ¼” Wood bolts with ½” head and 6 threads per inch

Six – 1/4” Toggle bolts

One – Renkus-heinz, Inc. Hinge Kit Model HK-IC24R &3 2R

TOOLS REQUIRED

- Drill

- 5/32” & 5/8” Drill bits

- Socket Driver

- 1/2” Socket

- Philips #2 screwdriver or socket driver

INSTALLATION

NOTE: Each HK series hinge consists of two parts, a male mounting plate and a female mounting plate. The female hinge plates should be

attached to the loudspeakers as shown in the drawings on page 72.. The male mounting plates attach to the wall.

Each male mounting plate is provided with 6 mounting holes. Only two wood bolts in each male mounting plate and screwed into studs and

two 1/4” toggle bolts are needed to fully satisfy mounting needs and safely secure the Renkus-Heinz IC-R-II loudspeakers to the wall.

Users Manual

IC-R-II

IMPORTANT MOUNTING INSTRUCTIONS

WARNING: THIS APPARATUS MUST BE SECURELY ATTACHED TO THE WALL IN ACCORDANCE WITH INSTALLA-

TION INSTRUCTIONS. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY RESULT IN INJURY.

Summary of Contents for IC-R-II Series

















































































Search results

Summary of Contents for IC-R-II Series

Reviews:

Related manuals for IC-R-II Series

Brands by name

Popular brands

iConyx IC-R-II Series, User Manual

Search results

Summary of Contents for IC-R-II Series

Reviews:

Related manuals for IC-R-II Series

Brands by name

Popular brands