TIB Series
TIB Series
TIB Series
TIB Series
TIB Series
TIB Series
TIB Series
TIB Series
Retention Cap
Retention Cap
Tab
Notch
Notch
Flow
Process Pipe
Sensor Blade
Top View
Locating Pin
Notch
1¼" G
Fig - 3
Fig - 4
Fig - 5
01
02
03
TIB Series
TIB Series
Fig - 1
Fig - 2
Ensure
O-rings
are well
lubricated
Ensure
tab is parallel
to flow
direction
Lubricate with
silicone inside of
insertion fitting
Locate the flow meter positioning
tab and clamp saddle notch.
Engage one thread of the sensor cap,
then turn the sensor until the alignment
tab is seated in the fitting notch.
Ensure tab is parallel to flow direction.
• Hand tighten
• DO NOT use tools
•
Ensure meter is firmly in place
Installation
Very Important
■
Lubricate O-rings with silicone (provided).
■
Using an alternating twisting motion, carefully lower the sensor
into the fitting.
|
Do Not Force
|
See Fig 5
■
Ensure tab/notch are parallel to flow direction
|
See Fig-2
Hand tighten the sensor cap.
DO NOT
use tools.
Correct Sensor Position
VERY IMPORTANT
Lubricate O-rings with silicone
Hand tighten
DO NOT use
display to
tighten
TIF Series
Multi-Function Batching Paddle Wheel Flow Meter
3
23-0069