ICON ProCon D300 Series, Operating Manual

Page: 25 / 28

D300 Series Operating Manual
25 ◀◀
|
“Current Setting” can assist users to connect to equipment such as central control computer and data acquisition instrument.
In the ‘Password’, you first need to enter the old password. If you haven’t set a password, select ‘Confirm’ to enter and you can jump to the
‘Enter New Password’ interface.
User can find ‘Password ’, ‘Version ’ and ‘Restore’ Version info and SN can assist remote help.
If you need to cancel the password, please enter the old password according to the prompts in the ‘Password Settings’. When prompted
to ‘Enter the new password’, just select ‘Save’. There is no password by default when the product leaves the factory. In the ‘restore factory
settings’, there is ‘calibration recovery’ and ‘parameter recovery’. ‘Calibration restore’ will restore the internal data and need recalibration
‘Parameter restore’ will restore all the data exception calibration data Password is need to enter ‘Restore factory settings’, when there is no
password, press [ENT] to enter the interface.
When data from multiple instruments need to be uploaded on site, the network node setting can help users quickly and effectively
distinguish the data source when uploading data, and up to 247 groups can be set.
Set “system text”, “version information” and “modify password” and other related settings in the system settings.