11
When your pulse is detected, a heart-shaped sym-
bol will flash in the upper display and then your heart
rate will be shown. For the most accurate heart rate
reading, hold the contacts for at least 15 seconds.
If your heart rate is not shown, make sure that your
hands are positioned as described. Be careful not
to move your hands excessively or to squeeze the
contacts tightly. For optimal performance, clean the
contacts using a soft cloth; never use alcohol, abra-
sives, or chemicals to clean the contacts.
6.
Turn on the fan if desired.
The fan has high and low speed settings. Press the fan
increase and decrease buttons
repeatedly to select a fan speed
or to turn off the fan.
Note: If the pedals do not
move for about thirty seconds, the fan will turn off
automatically.
7. When you are finished exercising, the console will
turn off automatically.
If the pedals do not move for several seconds, a series
of tones will sound, the console will pause, and the
time will flash in the display.
If the pedals do not move for several minutes, the con-
sole will turn off and the displays will be reset.
HOW TO USE AN 8-WEEK WEIGHT-LOSS WORKOUT
1. Turn on the console.
Press any button or begin pedaling to turn on the
console.
When you turn on the console, the displays will turn
on, a tone will sound, and the console will be ready for
use.
2. Select the desired week of the program..
To select the desired week of the
program, press the Select Week
button repeatedly until the number
of the desired week appears in the
display.
3. Select the desired day of the program.
There are three day workouts for
each week of the program. To
select the desired day of the pro-
gram, press the Select Day button
repeatedly until the number of the
desired day
4. Start the workout.
Press the Start button and begin pedaling to start the
workout.
Each workout is divided into one-minute segments.
One resistance level and one target speed are
programmed for each segment. Note: The same resis-
tance level and/or target speed may be programmed
for consecutive segments.
At the end of each segment of the workout, a series
of tones will sound. The resistance level for the next
segment will appear in the upper display for a few sec-
onds to alert you. The resistance of the pedals will then
change.
The speed meter (B) will show
two flashing bars that represent
the target speed zone for the
segment; the target speed zone
includes a range of speeds that
are within a few RPMs of the
target speed for the segment.
The solid bars represent your
actual pedaling speed.
As you exercise, keep your pedaling speed within the
target speed zone for the current segment by increas-
ing or decreasing your pedaling speed or by increasing
or decreasing the resistance of the pedals.
IMPORTANT: The target speed is intended only to
provide motivation. Make sure to pedal at a speed
and a resistance level that is comfortable for you.
If the resistance level for the current segment is too
high or too low, you can manually override the setting
by pressing the Resistance buttons. IMPORTANT:
When the current segment of the workout ends,
the pedals will automatically adjust to the resis-
tance level programmed for the next segment.
If you stop pedaling for several seconds, a series of
tones will sound and the workout will pause.
To restart the workout, simply resume pedaling. The
workout will continue until the last segment of the
workout ends.
5. Follow your progress with the display.
See step 4 on page 10.
6. Measure your heart rate if desired.
See step 5 on page 10.
7. Turn on the fan if desired.
See step 6 on page 11.
8. When you are finished exercising, the console will
turn off automatically.
See step 7 on page 11.
B
Summary of Contents for Pro-Form 85 CSX
Page 18: ...18 EXPLODED DRAWING...
Page 19: ...19 EXPLODED DRAWING...
