7
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you fi nish all assembly steps.
• Left parts are marked “L” or “Left” and right parts
are marked “R” or “Right.”
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
ASSEMBLY
2. Orient the Front Stabilizer (2) as shown, and
attach it to the Frame (1) with two M10 x 110mm
Screws (53).
53
1
2
2
1.
To use the assembly steps in this manual, first see the helpful tips below.
Summary of Contents for NTEX12921.4
Page 4: ...4 STANDARD SERVICE PLANS...
