10
7
7. Orient the Knob Shield (9) as shown, and press
it onto the Shield Cover (7).
Then, tighten the Seat Post Knob (27) into the
Frame (1).
Next, loosen and pull the Seat Post Knob (27),
slide the Seat Post (6) upward or downward to
the desired position, and then release the Seat
Post Knob.
Move the Seat Post upward or
downward slightly to make sure that the Seat
Post Knob is engaged in one of the adjust-
ment holes in the Seat Post.
Then, tighten the
Seat Post Knob.
9
1
6
7
27
8.
If there are studs on the underside of the
Seat (23), see the left drawing.
Attach the Seat
to the Seat Carriage (24) with four M8 Locknuts
(43) and four M8 Washers (64).
Note: The
Locknuts and Washers may be preattached
to the Seat.
If there are holes in the underside of the Seat
(23), see the right drawing.
Attach the Seat
to the Seat Carriage (24) with four M8 x 16mm
Screws (63);
start all the Screws, and then
tighten them. Note: The Screws may be preat-
tached to the Seat.
8
64
43
23
24
63
23
24
Summary of Contents for NTEX12921.4
Page 4: ...4 STANDARD SERVICE PLANS...
