8
4. With the help of a second person, hold the con-
sole assembly near the Uprights (73, 74).
Connect the Upright Wire (75) to the Console
Wire Harness (71).
See the inset drawing. The
connectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF THE CONNECTORS
ARE NOT CONNECTED PROPERLY, THE
CONSOLE MAY BE DAMAGED WHEN THE
POWER IS TURNED ON.
Remove the tie from the Upright Wire (75).
71
Console
Assembly
4
75
Tie
74
5. Insert the brackets on the Handrails (99) into the
Uprights (73, 74).
Make sure that no wires are
pinched.
73
5
74
99
6. Finger tighten three Handrail Bolts (64) with
three Upright Star Washers (90) into the Right
Upright (74). Next, finger tighten three Handrail
Bolts with three Upright Star Washers (not
shown) into the Left Upright (73). Then, firmly
tighten the six Handrail Bolts.
73
74
64
64
90
90
75
6
73
99
71
