7
2. Identify the Left Upright (73) and the Right
Upright (74).
See the inset drawing.
Tie the wire tie in the
Right Upright (74) securely around the end of
the Upright Wire (75). With the help of a second
person, hold the Right Upright near the Right
Base Cover (77). Then, pull the other end of the
wire tie up through the rectangular hole in the
bottom of the Right Upright until the Upright Wire
is routed completely through the Right Upright.
Gently pull up on the Upright Wire (75) as you
set the Right Upright (74) on the Base (83) in-
side the Right Base Cover (77).
Be careful not
to pinch the Upright Wire.
Attach the Right Upright (74) to the Base (83)
with two Upright Bolts (72) and two Upright Star
Washers (90).
Do not tighten the Bolts yet.
Note: It may be necessary to tip the top of the
Upright forward slightly and rotate the bottom as
you thread the Bolts into the Upright.
Attach the Left Upright (73) to the Base (83) with
two Upright Bolts and two Upright Star Washers
(not shown).
Do not tighten the Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand.
83
75
Wire
Tie
77
2
74
73
90
72
3. Identify the Right Upright Sleeve (96) and the
Left Upright Sleeve (95). The Sleeves are la-
beled. Slide the Right Upright Sleeve onto the
Right Upright (74) and the Left Upright Sleeve
onto the Left Upright (73).
95
“Right”
“Left”
96
3
74
73
75
74
Wire
Tie
