ICON Levelpro 300S Series, Operating Manual, Page: 4 / 19

Mounting and Safety Instructions
Installation Steps for Probe
WARNING! Install the device only when depressurized and not connected to power source!
WARNING! This device may only be installed by qualified technical personnel who has read and under stood the operating manual!
Handle this high sensitive electronic precision measuring device with care, both in packed and unpacked condition!
There are no modifications / changes to be made on the device.
Do not throw the package / device!
To avoid damaging the diaphragm, remove packaging and protective cap directly before starting assembly.
The delivered protective cap has to be stored!
Place the Protective Cap on the pressure port again immediately after disassembling.
Handle the unprotected diaphragm very carefully - it is very sensitive and may be easily damaged.
Do not use any force when installing the device to prevent damage of the device and the plant!
When placing the device into operation or after mainte nance work, the probe has to be submerged slowly into the medium! A rough
immersion into the medium can damage or destroy the diaphragm.
If there is any danger of damage by lightning or overpressure when the device is installed outdoor, we suggest putting a sufficiently
Sized overpressure protection device between the supply or switch cabinet and the device
Carefully remove the pressure measuring device from the package and dispose of the package properly.
Mount the device according to your demands.
If the probe has been delivered without mounting accessories. Please Contact Icon Process Controls ( www.iconprocon.com ) for
tank connection LP100 Junction Box .
For the protection of the diaphragm, some of the probes have a protection device. The device must be removed before installation
If it is necessary for your application to remove the protection cap, this has to be done with utmost care. To prevent damage of the
diaphragm, please follow these instructions.
Removing the Protection Cap
www.iconprocon.com | sales@iconprocon.com | 905.469.9283
04
Continuous Submersible Level Transmitter
300S Series
R
LP100 Junction Box
300S Series