BIA-DPC1 rev 4
Page 5
1.0
Introduction
Thank you for choosing a Bianco Icon Series Intelligent Pump Controller.
The Intelligent Pump Controller model is an easy to use, programmable controlling and protection
device for direct start, single phase pumps with output power from 0.37kW
–
2.2kW.
The Controller has many operation modes by adopting different electrical installations. Important
features that distinguish the Bianco Icon Series Intelligent Pump Controllers from some other
controllers are the push button calibration of overload and ability for dry run protection without
float switches or probes.
1.1 Applications
The Controller is useful in all cases where there is the need to control and protect single pump
installations managing the automatic operation by a variety of switching methods.
Typical usage scenarios include:
•
Stormwater
•
Sewage
•
Booster sets
•
Rainwater reuse
•
Irrigation
•
Water supply
1.2 Technical parameters and features
•
Built in function switch for
o
Drainage by liquid level control through float switches or probes
o
Boosting water supply by pressure control through pressure switch and tank
o
Transfer water by liquid level control through float switches and probes
•
Dry run protection without float switches or probes
•
Auto/Manual switch
•
Dynamic LCD displaying pump running state
•
Protect the pump against many faults
•
Push button calibration
•
Pump accumulative running time
•
Last five fault record
•
RS485 communication
•
Starts and stops the pump in accordance with liquid levels and pressure settings
